Table of Contents
Advertisement
2 Installation and startup
2.1 Mounting the case
The housing is fixed to the wall with two
screws, which are screwed diagonally
through the holes marked with "wall". he
heads
of
the
screws
maximum 6 mm in diameter so that the
cover is not screwed as well.
2.2 Opening the case
To deactivate the write protection or connect the cables the housing cover can be opened by
removing the metal screws above at the left and below at the right. The unprotect pushbutton is
then accessible from outside; the unit is unprotected by pressing this button.
Use a suitable adhesive seal to prevent unnoticed opening of the housing.
2.3 Connecting
The following drawing shows a typical application of the PadPuls M1:
User Manual PadPuls PadPuls M1 · 10/2018 · VERSION 1.4
67
46
should
be
M-Bus Master
PadPuls M1
PadPuls M1
D= 6
Wall
Housing
all dimensions in mm
D= 5
Housing
80
88
98
pulse generator (blue)
D= 5
D= 6
Wall
4
Advertisement
Table of Contents
