Sheet Info - Relay AnDi1 User Manual

3.3 Sheet Info

This sheet shows some photos of supported M-Bus devices from the product range of the Relay
GmbH, the PadMess GmbH and further manufacturer. Here are also links to the Internet page,
from which the current version of the program can be downloaded, and to the email address for
criticism and suggestions to the program.
The lower third of this card is likewise visible in every other card. Here the following input fields
and buttons are always attainable:
is the serial port of the PC to which the M-Bus level converter is
COM-Port
connected. The selected port will be saved in an INI file and will be
restored on startup. Therefore the COM-Port has to be configured
only once.
is the transmission speed of the serial port of the PC used for
Baudrate
parameterization. Possible selections for this used M-Bus baudrate
are 300, 2400 or 9600 baud. Attention: Baud rates of more than
User Manual AnDi1 / AnDi2 / AnDi3 / AnDi4 ·10/2017 · VERSION 1.3
AnDi1/2/3/4
8