Table of Contents
Advertisement
3.4 Sheet M1
This sheet shows the current settings and values of the PadPuls M1. The following input boxes
and buttons are used to change the parameters of the pulse adapter:
Prim. address
is the primary M-Bus address of the selected device. Values between 1 and
250 can be entered in this field for new assignment of the address. After
pressing the "Write" button the software programs this primary address and
further variable settings on this sheet into the M-Bus device.
ID (sec. adr.)
is the 8-digit M-Bus ID (identification no.), which is also used for secondary
addressing of this port.
Pre-programmed ID = YYMM + last 4 digits of serial no.
e.g. ser.no. = 15005, production date = Nov. 2017 (1711) → ID = 17115005
Fabric no.
is not used for the PadPuls M1.
Medium
describes the measured medium of the connected meter. Examples: Oil,
User Manual PadPuls PadPuls M1 · 10/2018 · VERSION 1.4
PadPuls M1
10
Advertisement
Table of Contents
