Table of Contents
Advertisement
1. Main Features
-
M-Bus Level Converter for 100 devices
-
Transparent level converting of several interfaces to M-Bus
-
Ethernet 10/100BaseT and USB 2.0 with driver for virtual serial port
-
2 x RS232C with terminals (TXD, RXD, GND)
-
2-wire RS485 interface (not addressable)
-
M-Bus Booster with Repeater function for extension of M-Bus networks
-
Galvanic isolation of all interfaces from M-Bus
-
Intelligent access control of the interfaces by a microcontroller
-
External power supply with wide range input for worldwide use
-
Housing for rail mounting
2. Installation
2.1 Functional Principle
2.2 Mounting
The PW100 housing is mounted on a TS35 top-hat rail. The width of the housing is 6 horizontal pitches (6 HP)
on the rail and, due to the low height of 60 mm, not only fits into a control cabinet, but also in a meter cabinet
under the covers.
The device requires an external power supply of approx. 42VDC. We strongly recommend using our NT016
power supply. If the PW100 is operated with another power supply, the function of the PW100 may be dis-
turbed. The NT016 also has a height of 60 mm and a width of only two module unit (2 HP).
PW100 · User Manual Version 1.0 - 11/2020
PW100
3
Advertisement
Table of Contents
