Viewing The Active Scan List; Editing Scan Lists - Motorola MTM800 Feature User Manual

When set to
following states:
• The last selected scan list, or
• the first list in the scan lists.
To select a list other than the one shown,
scroll through the scan lists and press
After completing the settings, the display
returns either to the Scan sub-menu or to Group mode.

Viewing the Active Scan List (

To enter the sub-menu,
press
This sub-menu allows you to view the active
scan list.
The display will show one of the following statuses:
• There is a selected, inactive scan list. Scanning is off.
• There is no selected scan list. Scanning is off.
• There is a selected, active scan list. Scanning is on.
To see the talkgroup status (active or not active) and priority
(if pre-programmed), press
talkgroups.

Editing Scan Lists (

To enter the sub-menu, press
The display allows you to scroll through the
scan lists to see the number of talkgroups
used per list.
To edit/view the contents of a scan list, press
to your selection.
Press
options:
1. Add a talkgroup to the selected scan list.
Every added talkgroup (including a favourite group) comes
with its range, its name or number, and its priority (if pre-
80
the display shows one of the
On
,
- -
7 Scan 2 Active List.
7 3)
to select one of the following
.
7 2)
and scroll through the
,
- -
7 Scan 3 Scan Lists
1 Select List
2 Off
Select List
Scan List 1
Active List:
Scan List 1
.
Scan List 1
Used: 4 Free: 16
and scroll
5 Clear List
1 Add Group