The Display; List Of Display Icons - Motorola MTM800 Feature User Manual

The Display

List of Display Icons

After you turn on your MTM800, icons appear along the top
of the display to indicate the following conditions:
Signal Strength (TMO)
Allows you to check signal strength before proceeding with a call. Six bars
indicate the strongest signal. Calls and messages may not be sent or
received in weak signal areas. A blinking antenna shows out-of-coverage.
Move to a location that indicates better coverage and reattempt the call.
The antenna is not shown in Direct Mode Group Call.
Signal Strength (DMO)
Indicates an incoming Direct Mode Group Call.
Direct Mode
Displayed when the terminal is in Direct mode.
DMO Gateway
Indicates that you selected to work with gateway. This icon has three
positions:
Solid — while the terminal is synchronised with the gateway (i.e., when
the terminal receives a presence signal).
Blinking — while the terminal is not synchronised with the gateway or
during attachment.
No icon — during a terminal to terminal call, or when you select to work
without gateway.
New Message Received
Indicates that you have new messages in your mail box.
External Alarm
Displayed when External Alarm ("Horn & Lights") is enabled.
Incoming Private Call
Flashes to indicate an incoming Private Call. The icon extinguishes if you
accept or reject the incoming call or if the call setup fails.
Phone Call
Flashes when a Phone Call is received.
Emergency
Appears while the MTM800 is in Emergency mode. The icon flashes to
indicate an incoming Emergency Group Call.
Priority Scan (with Priority Monitor Dot)
Indicates scanning is activated.
Data Connected
Displayed when the MTM800 is successfully connected to the external
device (laptop or desktop PC) and ready for data transfer.
Receiving/Transmitting Data: The icon indicates that data transfer is
currently taking place.
6