Tones - Motorola MTM800 Feature User Manual

Tones

= High Tone;
Description
• Back to Home mode
• Back to coverage
• Back to full service
Call clear warning
Call waiting tone while
Phone or Private Call are
pending
Clear-to-send. Another
terminal has just finished
transmitting.
Data Connected
disconnected tone
Talk Permit sounds upon
pressing the PTT. If Busy
tone sounds instead,
release the PTT and wait
for the Automatic Call Back
(same tone sequence).
Talk Permit without
gateway sounds upon
pressing PTT. The tone
indicates the selected
gateway is no longer
available (though you
started the call while it was
available). The call will be
set up in Direct mode from
DMO terminal to DMO
terminal.
• Talk Prohibit
• System busy
• Time-out timer expire
• Request rejected
• Called terminal not
available
• Called terminal busy
= Low Tone;
Type Repeated
Once
Once
Every 6 seconds,
until you terminate
the call or time-out
timer expires.
Once
Once
Once ("Normal
Tone")
Once ("Short Tone")
Twice
Once
Until you release the
PTT
87