Changing Range Or Talkgroup; Emergency In Tmo; Sending An Emergency Alarm - Motorola MTM800 Feature User Manual

Pressing the Emergency Key even if Transmit Inhibit is activated
causes immediately the terminal to radiate.
When entering the Emergency Mode the terminal should not be
within the RF sensitive area any longer!
The MTM800 interrupts the Ambience Listening call when you press
the Emergency key

Changing Range or Talkgroup

If the Emergency Group Call is configured to "tactical", you
can select a talkgroup other than the one displayed, press
and then
To change the range press
"Making a Group Call" on page 26.

Emergency in TMO

Sending an Emergency Alarm

Your MTM800 will send an Emergency Alarm (if configured
by your Service Provider):
• automatically, upon entering Emergency Mode
• if you press
Mode.
• If you change group while in Emergency Mode.
The screen will show one of the following delivery reports:
•
Alarm Sent
• Alarm Failed
In both cases, the screen returns within a few seconds to the
main screen of the Emergency mode.
Or - if configured by your Service Provider - your MTM800
will send an Emergency Alarm:
• If you press the Emergency button/foot switch without
entering Emergency Mode before.
- Other Emergency services such as starting TMO Emer-
gency Mode or initiating Emergency Private Call (if sup-
ported by the infrastructure) will be unavailable.
.
.
, and proceed as explained in
while the MTM800 is in Emergency
55