Compatible Components; Technical Data - Viega Easytop 2275.10 Instructions For Use Manual

2.3.5

Compatible components

Pipes
2.3.6

Technical data

Easytop ball valve with SC-Contur
The model is marked as follows:
noise class I pursuant to applicable regulations, see
n
from section: Marking on components" on page 7
Dimension
n
DVGW writing
n
green dot for potable water
n
Position indicator on the actuating lever
n
The model is equipped with press connections and compatible with the
Prestabo, Profipress, Sanpress and Sanpress Inox system.
The press connections are tested and approved according to the appli‐
cable regulations with the following pipe types:
Copper pipes
n
– see Ä „Regulations from section: Compatible components"
on page 7
Stainless steel pipes (material 1.4401 / 1.4521)
n
– see Ä „Regulations from section: Compatible components"
on page 7
Observe the following operating conditions for the installation of the
model:
Operating temperature [T
Operating pressure [P
max
]
max
] 1.6 MPa (16 bar)
Product information
Ä „Regulations
110 °C
12 from 21