Scan Barcodes - Infinite Peripherals Infinea Tab C User Manual

USER MANUAL — INFINEA TAB C

Scan Barcodes

You can scan one dimensional (1D) and optional two-dimensional (2D) barcodes with the Infinea Tab C. The effective reading distance of the
barcode reader varies based on the size of the barcode.
These types of scanning modes are supported:
• Single scan
• Multi-scan
• Motion detect
• Multi-scan without duplicates
1. To scan a barcode, press and hold the Scan button.
2. Position the scanner near the center of the barcode by aiming the illumination box over the outer edges.
3. Extend the pointer outside the edges of the barcode.
4. Pull the unit either backward or forward slowly decreasing or increasing the distance between the barcode and scanner unit the entire barcode is
read. The barcode data displays on your iOS device.
1D Barcode Scan
15-20 cm
2D Barcode Scan
11