HUAWEI MC509 CDMA Mini PCIe Module
Hardware Guide
6.7 Antenna Plug
Figure 6-4 Mating the plug
1.
2.
3.
4.
5.
Figure 6-5 Unmating the plug
Issue 03 (2014-12-26)
Align the mating tool or the mating end of the tool over the plug end of the cable
assembly.
Firmly place the tool over the plug until it is secured in the tool.
Place the plug cable assembly (held in the tool) over the corresponding
receptacle.
Assure that the plug and receptacle are aligned press-down perpendicular to the
mounting surface until both connectors are fully mated.
Remove the mating tool by pulling it up carefully.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Mechanical Specifications
48