Resin_N Signal - Huawei MC509 Hardware Manual

HUAWEI MC509 CDMA Mini PCIe Module
Hardware Guide
Figure 3-4 Connections of the WAKE# pin

3.4.3 RESIN_N Signal

The RESIN_N pin is used to reset the module's system. When the module software
stops responding, the RESIN_N pin can be pulled down to reset the module
hardware.
The RESIN_N signal is internally pulled up to 1.8 V, which is automatically on when
3.3 V is applied and it is active-low.
Figure 3-5 Connections of the RESIN_N pin
Issue 03 (2014-12-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description of the Application Interfaces
18