May 2019
2
Mount the transmitter
2.1
Mount to a DIN rail without a junction box
Procedure
1. Pull up the DIN rail mounting clip located on the top back side of the
transmitter.
2. Hinge the DIN rail into the slots on the bottom of the transmitter.
3. Tilt the Rosemount
4. Release the mounting clip.
Figure 2-1: Mounting the Rosemount 848T to a DIN Rail
Quick Start Guide
™
848T and place onto the DIN rail.
C
A. Rosemount 848T without installed enclosure
B. DIN rail
C. DIN rail mounting clip
Quick Start Guide
A
B
5