709/709H/710
Users Manual
mA Measure
In the mA Measure mode, the Product shows the loop current
measurement. This mode is without 24 V.
Figure 6 shows the mA Measure home screen and typical
connections for this mode.
To use mA Measure, select mA Measure from the Main menu.
When selected, the Product changes to the mA Measure home
screen.
250Ω shows in the lower right corner when the HART resistor is
enabled on the setup menu.
10
4 mA to 20 mA
4 mA-20 mA
4 mA to 20 mA
Output Device
4 mA to 20 mA
Output Device
Figure 6. mA Measure Connections