Turn The Scanner On And Off - Leica Aperio GT 450 User Manual

Element:
Rack loading area
Safety light curtain
Status lights
Fan filter

Turn the Scanner On and Off

The On/Off switch is located on the right side of the scanner near the back.
On position = I; Off position = O.
`
Ì
When you are turning the scanner off and on, follow these procedures according to the situation:
"Shut Down the Scanner" on page 41.
` Ì
` "Restart the Scanner After Interior Maintenance" on page 52.
Ì
` "Perform a Safe Restart After an Error" on page 55.
Ì
Aperio GT 450 User's Guide, Revision A © Leica Biosystems Imaging, Inc. 2019
Use:
Provides access to the carousel to load and unload
slide racks. This area is also referred to as the "front-
six," because the rack loading area gives you access
to six rack slots at a time.
The infrared safety light curtain detects objects in the
rack loading area. The carousel only rotates when the
safety light curtain area is clear.
The status lights are located below the rack slots
in the rack loading area. They indicate the status
of the front-six racks and the scanner. The colors of
the status lights match the colors of the rack status
Legend on the touchscreen interface.
The fan filter is located on the back of the scanner.
Clean the fan filter at least every six months. You can
insert the fan filter from the left side, the right side,
or the top (requires a different fan filter holder).
Chapter 2: Aperio GT 450 Overview
More details:
See "Load Racks in the Carousel" on
page 28.
See "Carousel Rotation" on page
26.
See "Check Scan Status" on page
33.
See "Red Blinking Lights on
Carousel" on page 54.
See "Clean the Fan Filter" on page
49.
17