Taurus ROW-X Assembly And Operating Instructions Manual page 15

Step 3: Connect monorail to the main frame
1. Lift the main frame on the foot straps, slide carefully the mono rail on the connector (see fig. C1).
2. Snap the connections firmly into place (see fig. C2).
C 1
Step 4: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical
safety.
C 2
15