Troubleshooting - Krups DIE CAST LAFAYETTE KM810555 Manual

Table of Contents

Advertisement

Available languages

Available languages

cafetie?relafayetteKM810.qxd:KM8005franc%

TROUBLESHOOTING

PROBLEM
The coffee does not brew or the
machine does not switch on.
Appliance appears to be leaking.
It takes a long time to brew.
16
ais-copie.qxd29/04/0915:07Page16
SOLUTION
Check to ensure the appliance is
plugged into a working outlet, and the
appliance is in the «ON» position.
The water tank (a) is empty or is
missing.
There was a power failure.
There was a power surge. Unplug the
machine, then plug it back in.
The clock must be reset after a power
failure.
The Auto-Off function switches off the
coffee maker. Switch off the coffee
maker then switch it back on to make
more coffee. For more information,
refer to the section « Making coffee ».
Water tank (a) is not in place.
Drawer is not closed properly.
Drawer has been opened during
brewing : press On/Off button (m) to
restart.
Make sure that the water tank (a) has
not been filled beyond the max. fill
level.
It may be time to descale your coffee
maker.
Numerous minerals may accumulate in
the coffee maker's circuit. Periodic
descaling of the machine is
recommended. More frequent descaling
may be necessary depending on the
hardness of the water. For more
information, refer to the "Descaling"
NOTE: do not dismantle the machine.
section.
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Die cast lafayette km810

Table of Contents