Saving The Adjusted Gamma Value In A File; Calling Up The Saved Gamma Value File - Sony VPL-VW12HT Image Director Operating Instructions Manual

2
Drag the adjustment point displayed on the
gamma value graph with your mouse to adjust the
gamma value.
To cancel the just-completed adjustment
Click the [UNDO] button. The just-completed
adjustment is cancelled, and the button label
switches to [REDO]. (Clicking the [REDO] button
retries the just-cancelled adjustment, and the
button label switches back to [UNDO].)
Note
After the adjustment data is sent to the projector
by clicking the [SEND] button, you cannot use the
[UNDO] button to return to the previous setting.
To smooth the curve
Click the [SMOOTH] button. The curve is
smoothed.
3
Send the adjusted gamma value to the projector.
When you click the [SEND] button, the adjusted
gamma value is sent to the projector. After the
data transmission is complete, use the projector to
confirm the adjustment with a real image.
Note
Do not disconnect the cable while the data is
being transferred.
Saving the Adjusted Gamma Value
in a File
You can save the adjusted gamma value data in a file,
and assign a name to the file. Follow the procedure
below.
1
Select [Save] from the [FILE] menu.
The following dialog box appears.
2
Enter the file name and select the location where
the file will be saved, then click the [Save] button.
The adjusted gamma value data is saved in a file.
Calling Up the Saved Gamma Value
File
You can call up the saved gamma value file using
ImageDirector. Follow the procedure below.
1
Select [Load] from the [FILE] menu.
The following dialog box appears.
Adjusting the Gamma Value
(Continued)
7
(GB)