Storage And Transport Lock - Silvercrest SHBSP 800 A1 Operating Instructions Manual

__291948_Haarschneider_Autokamm_B8.book Seite 48 Dienstag, 19. Dezember 2017 7:42 19
6. Figure C: put the shaving head 13 from the top onto the hair and
beard trimmer 4. Mind the two small guide rails to the right and left
of the hair and beard trimmer.
7. Press the shaving head 13 down until it firmly locks into position.

11. Storage and transport lock

• For storage, use the supplied travel protection bag 24.
• Activate the transport lock for the transport:
- Press and hold the on/off switch 7 for approx. 3 seconds.
- The lock symbol 20 flashes before the display 5 goes off.
NOTE: if the device is connected to the mains power supply, it is impos-
sible to activate the transport lock.
• To deactivate the transport lock, you have two options:
- Press the on/off switch 7 again and hold it for approx.
3 seconds. The device is switched on and the display of the bat-
tery capacity 16 appears.
- Connect the device with the USB cable 9 to the mains power sup-
ply.
48
GB