Cleaning And Care - Silvercrest SHBSP 800 A1 Operating Instructions Manual

__291948_Haarschneider_Autokamm_B8.book Seite 47 Mittwoch, 20. Dezember 2017 1:25 13

10. Cleaning and care

DANGER! Risk of electric shock!
Unplug the USB plug-in power unit 10 from the wall socket before
cleaning the hair and beard trimmer 4.
WARNING! Risk of injury!
Always switch the hair and beard trimmer 4 off before cleaning.
WARNING! Risk of material damage!
Do not use any astringent or abrasive cleaning agents.
NOTE: clean and oil the device after every use.
Hair and beard trimmer
• Wipe the casing of the hair and beard trimmer 4 with a damp
cloth.
Comb attachments
• Remove the comb attachments 1, 2 and 14.
• Rinse the comb attachments 1, 2 and 14 with water and let them
dry before reusing them.
Shaving head
1. Figure C: press the release button 12 to release the shaving
head 13.
2. Remove the shaving head 13 upwards.
3. Remove the hair remnants from the shaving head 13 by using the
supplied cleaning brush 23.
4. Clean the blades 3 of the shaving head 13 with water. Do not use
any other liquids. Let the shaving head 13 dry.
5. Apply a few drops of the supplied oil 22 to the blades 3 of the
shaving head 13 and spread it out evenly. Using a soft cloth, wipe
off the surplus oil, if necessary. Only use acid-free oil, such as e.g.
sewing machine oil.
47
GB