Changing Basic Settings - Auriol 300076 Operation And Safety Notes

dates its time once daily via DCF signal. The reception pro-
cess is indicated with an animated DCF symbol 8 in the info
field 7 . If reception is successful the DCF symbol will be stat-
ic. If reception is unsuccessful the DCF symbol will disappear
until the next successful reception.
manually:
Press and hold the + / RCC 3 button for 3 seconds. The
flashing DCF symbol in the info field 7 indicates the prod-
uct is attempting to receive a signal.
Note: You may cancel reception by pressing the + / RCC 3
button again. The DCF symbol will then stop flashing.

Changing basic settings

Press and hold the MODE 2 button for 3 seconds to
access the basic settings mode from clock mode.
During each of the following programming steps press the
+ / RCC 3 or - / °C / °F 4 button to make a change.
TIP: Pressing and holding the + / RCC or - / °C / °F
button will quickly increase or decrease the numbers.
Press the MODE 2 button to confirm a setting. You will
automatically advance to the next programming step.
116 GB/MT