Replacing / Removing The Batteries; Initial Use; Changing Basic Settings - Auriol HG02918A Operation And Safety Notes

˜ Replacing / removing the batteries
Note: If the display becomes dim or keeps flashing
continuously, the batteries need to be changed .
Always replace all the batteries at the same time .
Only use battery type LR03 .
Open the battery compartment
battery compartment cover
If applicable, remove the old batteries . When powered by
batteries, insert new batteries . Check the polarity (shown in
the battery compartment
Close the battery compartment
again ready for use .
˜ Initial use
˜ Changing basic settings
Press and hold the SET button
the basic settings mode .
by the handle of the
7
.
8
) of the batteries .
7
. Your product is now
7
for 3 seconds to access
1
GB 21