Displaying Summer Time; Calling Up The Time Zone; Setting The Alarm Time - Auriol 284995 Operation And Safety Notes

Note: The seconds display can only be
reset to 00.
11. After this, the LC display returns to the
default display.

Displaying summer time

Summer time is indicated by the DST symbol
in the LC display. The temperature station au-
tomatically detects from the DCF radio signal
whether it is summer time or not.

Calling up the time zone

The default display shows the time zone ac-
cording to the information provided by the
DCF-Signal.
Press the CLOCK button
zone
18
Press the CLOCK button again to return
to the default display.

Setting the alarm time

You can set two different alarm times.
1. Press and hold down the ALARM button
for about 3 seconds.
20
Note: If an alarm time has been set be-
fore, then that previously set alarm time
appears in the LC display. If not, then the
display shows 0:00 or AM 12:00.
2. The hour display flashes. Press the SET /
RESET button
appears in the LC display.
to set the desired value.
24
. The time
19
GB/MT
1
91