Displaying Summer Time; Calling Up The 2 Nd Time Zone; Setting The Alarm Time - Auriol Z31055A Operation And Safety Notes

Note: The seconds display can only be
reset to 00.
11. After this, the LC display returns to the default
display.

Displaying summer time

Summer time is indicated by the DST symbol
in the LC display. The weather station automati-
cally detects from the DCF radio signal whether it
is summer time or not.
Calling up the 2
The default display shows the time zone according
to the information provided by the DCF signal.
Press the CLOCK button
zone appears in the LC display.
16
Press the CLOCK button again to return to the
default display.

Setting the alarm time

You can set two different alarm times.
1. Press and hold down the ALARM button
for about 3 seconds.
Note: If an alarm time has been set before,
then that previously set alarm time appears in
the LC display. If not, then the display shows
0:00 or 12:00.
2. The hour display flashes. Press the SET /
RESET button
20
3. Press the ALARM button to confirm your
settings. The minute display flashes.
18 GB
nd
time zone
. The 2nd time
22
to set the desired value.
14
21