In this mode the scanner functions and communicates similar to a
keyboard. Therefore, the scanner will work with Notes, and any other
application that supports an active cursor.
1. Power on the scanner. Make sure the scanner is
discoverable (unpaired).
2. Go to Settings | Bluetooth.
3. Make sure the device has Bluetooth "On" and scan for devices.
4. In the list of found devices, tap D740 or D760 [xxxxxx] to Pair.
5. The scanner will connect to the host device.
6. The scanner will beep once after it has connected.
*If you have trouble connecting or pairing with host device, turn host
device's Bluetooh off/on, and/or perform factory reset on the scanner
(see page 50).
Now you are ready to scan barcodes!
Connect Device in Basic Mode
BASIC MODE
14