Socket DURASCAN D740 User Manual page 15

Connect Apple iOS device in Application Mode
Please check with your scanner application vendor or visit
www.socketmobile.com/appstore
application supports the scanner.
If you are using the scanner with an Apple iOS device and a
scanner-enabled Application that does not provide instructions how to
connect your scanner, please use the following steps.
1. Power on the scanner. Make sure the scanner is discoverable
(unpaired).
2. To change the profile to Application Mode scan this barcode. The
scanner will beep 3 times.
(Scanning this barcode changes the connection mode)
3. Go to Settings | Bluetooth.
4. Make sure the device has Bluetooth "On" and scan for devices.
Use with iPad, iPod touch, and iPhones.
APPLICATION MODE
to confirm your scanner-enabled
15