Sony WEGA KP-FX43 Operating Instructions Manual page 12

Connecting optional components (continued)
Connecting a DVD player to
1 Using an audio cable, connect R and L under
your projection TV to the LINE OUT, AUDIO R and L output connectors on your
DVD player.
2 Using a component video cable, connect Y, P
(component video input) on your projection TV to the COMPONENT VIDEO OUT
Y, C , and C output connectors on your DVD player.
B R
3 Press t or HD/DVD on the remote or t on the projection TV until "HD/DVD 1"
appears on the screen if you connect your DVD player to
connection to
Component video cable
(not supplied)
To component
video output
C C Y
R B
COMPONENT VIDEO OUT
12
Using Your New Projection TV
2.
Audio cable
To audio
(not supplied)
output
R-AUDIO-L VIDEO
LINE OUT
S VIDEO OUT
DVD
player
Notes
• Some DVD player terminals may be labeled differently:
Connect To (on the DVD player)
Y (green) Y
P /C (blue) C , B-Y or P
B B b
P /C (red) C , R-Y or P
R R r
• Connect nothing to the HD/VD jacks when connecting a DVD player to
1 or 2 (component video input).
• If you select "HD/DVD 1" or "HD/DVD 2" on your projection TV screen,
no sound and no picture will be output from the T (monitor output)
jacks. This does not indicate a malfunction.
• When receiving a progressive signal through
input), TWIN pictures and PROGRAM INDEX features are not available,
and "DRC-MF" and "GAME MODE" are not selectable.
(component video input)
1 or 2 (component video input) on
/C , and P
B B
Rear of
projection TV
To 1 or 2
(component video input)
-
To L (white)
- R (red)
B
R
/C under 1 or 2
R R
1, or "HD/DVD 2" for
Y Y
G
P
B
/C P /C
B B B
B
P
R
/C P /C
R
R R
R
L L
R R
1 2
: Signal flow
(component video