Operation; Before Switching On For The First Time - Silvercrest SRRP 3.7 A1 Operating Instructions Manual

6. The plug symbol 12 is lit red and the battery is charged.
When the battery is fully charged, 100% is displayed.
When the battery is fully charged, the device can be used
for approximately 60 minutes without being connected to
the power supply.
NOTE: the rotary shaver 9 can also be charged without a bat-
tery charger 23 only using the plug-in power unit 21. For this
purpose, insert the small Micro USB plug of the plug-in power
unit 21 directly into the Micro USB port 15 of the rotary shaver.

6. Operation

6.1 Before switching on for the first time

CAUTION:
After unpacking, there could still be oil residues on the shav-
ing heads 5 of the shaving attachment 6. Remove these with
an absorbent, lint-free cloth before using the device for the
first time.
Regardless of the charging state of the battery, the rotary shaver 9
can always be used in mains operation.
1. Before switching to mains operation, ensure that the device
is switched off.
2. Insert the small Micro USB plug of the plug-in power unit 21
into the Micro USB port 15 of the rotary shaver.
13
GB