Table of Contents
Advertisement
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
Getting Started
Connections
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.
Plug the connector into the
(antenna) socket at the rear of the TV.
Rear of TV
Connecting optional equipment
You can connect optional audio/video equipment to your TV such as a VCR, multi disc player, camcorder, video
game or stereo system.
Connecting video equipment using video input jacks
Rear of TV
to
(antenna) socket
to
(S video input)
1
2
3
R
L
...
to
1, 2, or 3 (video input)
(MONO)
(yellow)
-L (MONO)(white)
-R (red)
6
-EN
Getting Started
SECTION 1
On a wall
Rear of TV
or
to
to
S video
antenna
output
output
VCR
to video and
audio outputs
: Signal flow
GENERAL
Front of TV
When connecting a monaural VCR
Connect the yellow plug to
(video input) and the black plug to
When connecting video game equipment
Connect video game equipment to the ... 3 (video input) jacks at the front or the rear of your TV.
When connecting a VCR to the
Preset the signal output from the VCR to the program position 0.
When connecting video equipment to the ... 3 (video input) jacks at the front and the rear
Do not connect video equipment to the ... 3 (video input) jacks at the front and the rear of your TV simultaneously; otherwise the picture
will not be displayed properly on the screen.
If both S Video and video signals are input simultaneously
The S video input signal is selected. To view a video input signal, disconnect the
Note on the video input
When no signal is input, the screen becomes blue.
Connecting audio/video equipment using Ú (monitor/TV output) jacks
Rear of TV
to
(antenna) socket
1
2
3
R
L
(MONO)
Camcorder
to
(S video input)
to S video output
3
L(MONO)
R
to
...
3 (video input)
to video and
audio outputs
(yellow)
-L (MONO)(white)
-R (red)
-L (MONO) (audio input).
(antenna) terminal
(S video) connection.
Audio system
to
antenna
VCR
output
or
to video and
audio inputs
to
Ú
(monitor/TV output)
: Signal flow
(yellow)
-L (MONO)(white)
-R (red)
Getting Started
: Signal flow
to audio
inputs
7
-EN
Hide quick links:
Advertisement
Table of Contents
