Download  Print this page

Connecting The Tv; Cable System And Vhf/uhf Antenna System; Cable Box/digital Cable Box And Antenna - Sony KDS-R60XBR2 Service Manual

Sxrd projection tv.
Hide thumbs

Advertisement

Getting Started

Connecting the TV

Cable System and
VHF/UHF Antenna
System
Cable Box/Digital
Cable Box and
Antenna
z To change channels
using the cable box, set
your TV to channel 3 or
4 depending on the
cable box channel
output.
16
To display clear crisp pictures, you must connect your TV correctly and
select the correct Wide Mode to display the picture in the correct aspect
ratio (see "Changing the Wide Screen Mode" on page 31). It is strongly
recommended that you connect the antenna/cable input using 75-ohm
coaxial cable to receive optimum picture quality signal. A 300-ohm twin
lead cable can be easily affected by radio noise and the like, resulting in
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far
away from the TV as possible. Do not use an indoor antenna, which is
especially susceptible to radio noise.
You can also connect a variety of optional equipment to your TV (see page
17). For multiple equipment connections, please refer to the separate Quick
Setup Guide.
CATV cable
Press ANT to switch between VHF/UHF and cable.
Use this hookup if
Your cable company scrambles some channels, such as premium
channels. Viewing all channels requires a cable box.
You do not intend to hook up any other audio or video equipment to
your TV.
CATV cable
To set up the TV remote control, see "Programming the Remote
Control" on page 32.
Press SAT/CABLE to begin operating the cable box with the remote
control (see page 28). The indicator will light up.
Press ANT to switch between VHF/UHF and cable.
Antenna cable
IN
OUT
Cable box
Coaxial
cable
Antenna
cable
VHF/UHF
CABLE
Rear of TV

Advertisement

Table of Contents

   Related Manuals for Sony KDS-R60XBR2

This manual is also suitable for:

Kds-r70xbr2

Comments to this Manuals

Symbols: 0
Latest comments: