EMS SYSTEM 7000 Series Installation And Programming Instructions page 28

EMS SYSTEM 7000
17.11 By using the "4" button to move left or the "6" button to move right, move to the
letter or number required and press the "5" button to select the character.
17.12 Repeat 16.11 until all letters have been selected. Once completed, Press the ""
button to save the information.
17.13 Once completed you may now escape from this menu by pressing the "3" button
on the keypad until the "SYSTEM RESET" message appears or by returning the
control keyswitch to the "CLEAR" position.
KEY
0 Enters a blank space into the new device name being entered.
3 Exits to the previous menu
4 Moves the alphabet wheel of characters to the Left, by one character space at a
time.
5 Enters the character in the centre directly above the character selector |.
6 Moves the alphabet wheel of characters to the Right, by one character space at a
time.
7 Moves the flashing cursor to the left, through the new device name by one
character space at a time.
8 Moves the alphabet wheel of characters to the Right, by 12 character Spaces at a
time.
9 Moves the flashing cursor to the Right, through the new device name by one
character space at a time.
 Backspace Key, Deletes by one character. (Deletes to the left only)
 Saves and completes the current activity and returns the program to the
appropriate display.
©2015 EMS Security Group Ltd. All rights reserved.
FUNCTION
28
TSD248 Iss 2 25/06/15 AJM