Adding An Input (Contact Mode) Into The Iris Radio Receiver - EMS SYSTEM 7000 Series Installation And Programming Instructions

EMS SYSTEM 7000

15. Adding An Input (Contact Mode) Into The IRIS Radio Receiver

The following sequence of operations is required when adding an input with the mode
setting programmed as contact into the UHF IRIS Radio Receiver.
15.1 With the control keyswitch in the
"CLEAR" position the screen should
now display:
15.2 Turn
"RESET". The screen should now
display:
15.3 Press the "0" button, and the screen
will now display:
15.4 Enter the engineering default PIN:
"221100",
button, and the screen will display:
15.5 Press the "" button until the
screen displays:
15.6 Press the "1" button and the screen
will display:
15.7 Press the "1" button and the screen
will display:
15.8 Press the "" button until the
screen displays:
15.9 Press the "1" button and the
screen will display:
©2015 EMS Security Group Ltd. All rights reserved.
the control keyswitch
then press
01/10/93
to
*** SYSTEM RESET ***
Enter Your PIN
For Menus > _
=Done =Del
|** Main Menu **
the ""
> Pins & Access <
| System Support |
2=Help
| Time and Date |
>Radio Setup
| Output Setup
2 = Help
| ** Radio Setup ** |
> Add Transmitter <
| Txer Details
2 = Help
| -Add Transmitter-|
> Add Hand push <
| Add Moneyclip |
2 = Help
| Add Foot - Trip |
> Add Contact Txer <
| Add Interrogator |
2 = Help
| -- Contact Type -- |
>
|
2 = Help
23
System Clear
13:26
13:26
13:26
|
13:27
<
|
16: 37
|
16:37
16:37
16:37
Alarm N/O <
Alarm N/C |
16:37
TSD248 Iss 2 25/06/15 AJM