Load Default Values - EMS SYSTEM 7000 Series Installation And Programming Instructions

EMS SYSTEM 7000

12. LOAD DEFAULT VALUES

12.1 This command is not actually shown on the menu but can be used to default all of
the systems inputs. Default values for the inputs are as follows:
Inputs 1-8.............. ID
12.2 To change all of the inputs to their default settings type load defaults and press
the enter key. The display will now show:
Load Default Values Y/N ?
Press the Y key and then enter the display will then change to show:
Please Wait.....
The system will then return to the command menu.
©2015 EMS Security Group Ltd. All rights reserved.
A0001-A0008
Con Normally Open
Type Alarm
Mode Contact
19
TSD248 Iss 2 25/06/15 AJM