EMS SYSTEM 7000 Series Installation And Programming Instructions page 22

EMS SYSTEM 7000
14.10 Activate the required input to be
added by applying or removing
voltage (depending upon N/O or
N/C input) and the screen will
display:
14.11 After a short period of time the
screen will change to display:
14.12 Using the same operation, once
again generate a transmission,
after a short period of time the
screen will change to display:
14.13 You may now add additional inputs by repeating the actions detailed. If no further
inputs are to be added then escape from this menu by pressing the 3 button on
the keypad or returning the control keyswitch to the CLEAR position.
©2015 EMS Security Group Ltd. All rights reserved.
Release all buttons
Operate Transmitter
Again or press
Escape to cancel
Hand Push 001
Push any key
22
NOW
16:38
16:38
Added
16:38
TSD248 Iss 2 25/06/15 AJM