Adding An Input (Hand Push Mode) Into The Iris Radio Receiver - EMS SYSTEM 7000 Series Installation And Programming Instructions

EMS SYSTEM 7000

14. Adding An Input (Hand push Mode) Into The IRIS Radio Receiver

The following sequence of operations is required when adding an input with the mode
setting programmed as hand push into the UHF IRIS Radio Receiver.
14.1 With the control keyswitch in the
"CLEAR"
should now display:
14.2 Turn the control keyswitch to the
"RESET"
should now display:
14.3 Press the "0" key, and the screen
will now display:
14.4 Enter
PIN: "221100" and then press
the "" button, the screen will
now display:
14.5 Press the "" button until screen
displays:
14.6 Press the "1" button and the
screen will display:
14.7 Press the "1" button and the
screen will display:
14.8 Press the "" or "" buttons to
highlight the type of transmitter
to be added, and press the "1"
button and the screen will change
to display the options available:
14.9 With the opposed action between
the > and < arrows, press the
"1" button and the screen will
change to display:
©2015 EMS Security Group Ltd. All rights reserved.
position the
position. The
the engineering
screen
01/10/93
screen
*** SYSTEM RESET ***
Enter Your PIN
For Menus > _
=Done =Del 13:26
default
| ** Main Menu
>Pins & Access <
| System Support |
2=Help
| Time and Date |
> Radio Setup
| Output Setup
2 = Help
| ** Radio Setup ** |
> Add Transmitter <
| Txer Details
2 = Help
| -Add Transmitter-|
> Add Hand push <
| Add Moneyclip |
2 = Help
| - Hand push Type - |
> Opposed Action <
|
2 = Help
Operate Transmitter
Escape to cancel
21
System Clear
13:26
13:26
**|
13:27
<
|
16: 37
|
16:37
16:37
Non-Opposed |
16:37
NOW or press
16:38
TSD248 Iss 2 25/06/15 AJM