EMS SYSTEM 7000
16.9
Press the "1" button and the
screen will display:
16.10
Activate the required input to be
added by applying or removing
voltage (depending upon N/O or
N/C input) and the screen will
display:
16.11
After a short period of time the
screen will change to display:
16.12
Using the same operation, once
again generate a transmission,
after a short period of time the
screen will change to display:
16.13 You may now add additional inputs by repeating the actions detailed. If no further
inputs are to be added then escape from this menu by pressing the 3 (three) on
the keypad or returning the key to the "CLEAR" position.
©2015 EMS Security Group Ltd. All rights reserved.
Operate Transmitter
NOW or press
Release all buttons
Operate Transmitter
Again or press
Escape to cancel
Interrogator 001
Added
Push any key
26
Escape to cancel
16:38
NOW
16:38
16:38
16:38
TSD248 Iss 2 25/06/15 AJM