Adding A Transmitter Into The Iris Radio Receiver - EMS 7940 IRIS+ Installation And Programming Instructions

EMS 7000 IRIS +

10. Adding A Transmitter Into The IRIS Radio Receiver

The following sequence of operations is required when adding a transmitter into the UHF
IRIS Radio Receiver.
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
The IRIS LCD screen with the
key in the "CLEAR" position will
show the following display:
Turn the front panel key to
"RESET". The screen will change
to display:
Press the "0" button, the screen
will now change to display:
Enter the engineering
PIN: "221100" and press the " "
button, the screen will change to
display:
Press " " until
displays:
Press the "1" button and the
screen will change to display:
Press the "1" button and the
screen will change to display:
Press the "1" button and use
the " " or " " arrow keys to
highlight the type of transmitter
to be added, the screen will
change to display the options
available:
With Opposed Action between
the > and < arrows press the
"1" button and the screen will
change to display:
01/10/93
*** SYSTEM RESET ***
Enter Your PIN
For Menus > _
=Done
default | ** Main Menu **
> Pins & Access
| System Support
2=Help
the screen |
> Radio Setup
|
2 = Help
| ** Radio Setup ** |
> Add Transmitter <
|
2 = Help
|
> Add Handpush
|
2 = Help
|
> Opposed Action <
|
2 = Help
Operate Transmitter
16
System Clear
13:26
13:26
=Del 13:26
<
|
13:27
Time and Date |
<
Output Setup |
16: 37
Txer Details |
16:37
Add Transmitter |
<
Add Moneyclip |
16:37
Handpush Type |
Non-Opposed |
16:37
NOW or press
Escape to cancel
16:38
7940 ENGINEERS GUIDE v2.2 – 13/04/10
|