Software Configuration - EMS 53-5414 Installation And Programming Instructions

EMS 5000 FIREPOINT

7. Software Configuration

To allow the Control Panel and remote receivers to work together, some software
configuration will be necessary, the following instructions detail in a step by step format
how the configuration should take place for reliable communication. The menu structure
indicated at the end of this section locates the menus, which require entering.
1 With the key the "ON" position, the screen will now display:
2 Press the "0" key. The screen will now display:
3 Press the "YES" key. The screen will now display:
4 Press the "YES" key. The screen will now display:
5 Enter your PIN number (Engineering default = 221100) and
press the "YES" key. The screen will now display:
Press any key and the screen will display:
6
7 Press the "" key, until 'the screen displays:
8 Press the "YES" button and the screen will display.
9 Press the "" key, until 'the screen displays:
10 Press the "YES" key and the screen will display:
©2015 EMS Security Group Ltd. All rights reserved.
7
Panel In Access
DATE TIME
| *** Options **** |
> Passwords <
| Time and Date |
YES = Select TIME
| * PIN's and Access * |
>User Log On
| View Users
YES = Select TIME
Enter your PIN
For Access >
Then Press YES TIME
**************************
* Welcome Engineer *
**************************
Push any Key TIME
| *** Options **** |
>Passwords <
| Time and Date |
YES = Select TIME
| Logging
>Fire System Opts <
| Remote Access
Yes = select Time
| ** Fire system **
>Dev. Disable/Test <
| Net. Disable/Test
Yes= Select Time
| System Mode
> Engineers Config <
| Printer Options
Yes= Select Time
| ** Eng. Config ** |
>Device Database <
| Sounder Options |
Yes= Select Time
TSD244 Iss 3 25/06/15 AJM
<
|
|
|
|
|
|
|