EMS 53-5414 Installation And Programming Instructions page 8

EMS 5000 FIREPOINT
11 Press the "" key, until 'the screen displays:
12 Press the "YES" key followed by the "0" key on the keypad
the screen will now display:
13 Press the "" key, until 'the screen displays:
14 Press the "YES" button and the screen will display:
15 Press the "" key, until 'the screen displays:
16 Press the "YES" button and the screen will display:
17 Press the "" key, until 'the screen displays:
18 Press the "YES" button and the screen will display:
19 Press the "1" key followed by the "YES" key and the screen
will display:
20 Press the "NO" key once and the screen will display:
21 Press the "" key until the screen displays:
©2015 EMS Security Group Ltd. All rights reserved.
8
| Reset Security |
>Reset System <
| Lan Options |
Yes= Select Time
| ** Main Menu ** |
>Pins & Access <
| System Support |
Yes= Select Time
| System Support |
> Serial Comms <
| Pager Setup
Yes= Select Time
| ** Serial Comms ** |
>Device Table <
| Re-start Bus |
YES = Select TIME
| Re-online Device
> Bus Master Setup <
| Bus Remote Setup |
Yes= Select Time
| ** Master Setup** |
>Polling Baudrate <
| Auto Re-online |
YES = Select TIME
| Auto Re-online |
> Port to use <
| ^^^^^^^^^^^^^ |
Yes= Select Time
Master Port = 0
0 = Off, 1 = RS485
2 = PAGER 232 > _
YES = Finish TIME
| Auto Re-online |
> Port to use <
| ^^^^^^^^^^^^^ |
Yes= Select Time
| Re-online Device
> Bus Master Setup <
| Bus Remote Setup |
Yes= Select Time
| Device Table
>Re-start Bus <
| Re-Online Device |
YES = Select TIME
TSD244 Iss 3 25/06/15 AJM
|
|
|
|