Operating With An Ios Device - Zoom F6 Operation Manual

Operating with an iOS device

■ Pairing with an iOS device
By connecting a ZOOM wireless adapter (e.g. BTA-1) and using the ded-
icated controller app, the can be operated from an iOS device.
NOTE
• • The dedicated app must be installed on the iOS device beforehand. The
dedicated app can be downloaded from the App Store.
• • See the manual for the app for procedures to set and operate it.
• • The
can only be paired to one iOS device. Pairing a different iOS
device will make it no longer possible to connect with the previously
paired iOS device.
• • Trying to connect the previous iOS device will cause an error message to
appear on the display and turn the BTA-1 off.
• • To reconnect a previously paired iOS device, follow the instructions in the
operation manual for the iOS device that you are using to remove the
that is registered as a Bluetooth device.
• • Then, after you launch F6 Control, the password input screen will appear,
making pairing possible.
1.
Remove the wireless adapter connector cover and con-
nect the wireless adapter.
2.
Press .
3.
Use and
SYSTEM, and press
154
to select
.