Operating With An Ios Device; Pairing With An Ios Device - Zoom H3-VR Operation Manual

Operating with an iOS device

Pairing with an iOS device

By connecting a BTA-1 or other dedicated wireless adapter and using the dedicated controller app, the
can be operated from an iOS device.
NOTE
• The dedicated app must be installed on the iOS device beforehand.
The dedicated app can be downloaded from the App Store.
• See the manual for the app for procedures to set and operate it.
1.
Remove the REMOTE connector cover and connect a BTA-1 or other dedicated wireless
adapter.
A password that is used to identify the BTA-1 or other dedicated wireless adapter will be shown.
2.
Launch the dedicated app on the iOS device, and enter the password shown on the
display.
This starts pairing.
When pairing completes, "Connected" will appear on the
HINT
• Entering a password will not be necessary when launching the app again in the future.
• Use the and the iOS device as close together as possible to make communication more reliable.
display.
85