Updating The Frc-8 Firmware - Zoom F6 Operation Manual

Updating the FRC-8 firmware

The firmware version can be checked and updated to the latest version.
The latest update file can be downloaded from the ZOOM website (www.zoom.co.jp).
1.
See "Using an
connect the and the
NOTE
Updating is not possible if the remaining battery or DC power supply
charge is low. In this case, replace the batteries with new ones or use a
charged DC power supply.
2.
Copy the update file to the root directory on an SD card.
3.
Load the SD card into the SD slot.
4.
Press .
5.
Use and to select
SYSTEM, and press
as a controller" ( → P. 143), and
.
.
6.
Use and
USB, and press
7.
Use and
FRC-8, and press
▶
Continue to one of the following procedures.
Checking the firmware versions ................................................ P. 152
Updating the firmware .................................................................. P. 152
151
to select
.
to select
.