Using An Frc-8 As A Controller - Zoom F6 Operation Manual

Using an FRC-8 as a controller

When an is connected to the
NOTE
An cannot be used when operating with AA batteries. When mul-
tiple power supplies are connected to an
will automatically change according to the remaining battery charge. When
it switches to AA batteries, connection with an
1.
Press .
2.
Use and to select
SYSTEM, and press
3.
Use and to select
USB, and press .
, it can be used to adjust settings, including trim, fader and pan.
, the power supply being used
will be interrupted.
.
4.
Use and
FRC-8, and press
5.
Use and
Connect, and press
6.
Use a USB cable to connect the
7.
Turn the
143
to select
.
to select
.
and the
power on.
.