Safety Guidelines; Safe Handling Of Equipment - Quantum QXS G2 Series Hardware Installation And Maintenance Manual

This chapter provides information for the following 12-G QXS systems:
• QXS-G2-312: 12-Drive (2-Port: FC or iSCSI)
• QXS-G2-324: 24-Drive (2-Port: FC or iSCSI)
• QXS-G2-412: 12-Drive (4-Port: FC or iSCSI)
• QXS-G2-424: 24-Drive (4-Port: FC or iSCSI)
• QXS-G2-484: 84-Drive (4-Port: FC or iSCSI)
This chapter provides the following sections:
•

Safe Handling of Equipment

• Operation of the QXS G2 Systems
• Electrical Safety
• Rack System Safety Precautions
Safe Handling of Equipment
Always follow these safety cautions when handling the QXS G2 equipment.
CAUTION: Use this equipment in a manner specified by the manufacturer: failure to do this may
cancel the protection provided by the equipment.
• Permanently unplug the chassis before you move it or if you think that it has become damaged in
any way.
• A safe lifting height is 20U.
• Always remove the power supply units (PSUs) to minimize weight before you move the chassis.
• Do not lift the chassis by the handles on the PSUs—they are not designed to take the weight.
CAUTION: Do not try to lift the chassis by yourself:
• Fully configured 2U12 chassis can weigh up to 32 kg (71 lb).

Safety Guidelines

Safety Guidelines
Chapter 1
1