Omron H5L Series Manual page 8

H5L
Creating Timing Chart
Writing the Program
Setting the current time
8
First circuit
Second circuit
To set the current time, "day of the week", "hour", and "minute" must be specified.
First, turn on the power to the H5L. Press the Mode key for more than 1 sec. The
TIM ADJ indicator is displayed.
Set 11:15 on Tuesday, the current time in example1.
Start with setting the day of the week. The blinking indicator indicates the parameter
that can be set. Set the current day of the week to Tuesday by pressing the + or –
key.
When "TUE" is displayed, press the Write key to store the current day of the week in
memory. Then the "hour" indicator will flash at this time and the "day of the week"
indicator will stop blinking.
Set the current hour to 11 by pressing the + or – key, followed by the Write key.
At this time, the "minute" indicator will blink. Set the current minute to 15 by pressing
the + key or – key, followed by the Write key.
This completes the current time setting.
Next, program the first circuit's operation.
H5L