ODB SKB700 Owner's Manual page 41

figure 3d
PTO shown fully engaged
figure 3b
PTO handle
PTO shown disengaged
ODB COMPANY
Operating Section
3.7 Engaging the PTO, continued;
5. MPORTANT: If the unit experiences any heavy vi-
brations or makes any unusual noises, shut the en-
gine down and after following the necessary safety
guidelines, have a qualified technician investigage
the cause. DO NOT operate a unit that is in a state of
disrepair.
6. If the unit is running smoothly and does not dispaly any
excessive vibration, the unit is ready to vacuum leaves.
NOTE: Please see the next section before vacuuimg
leaves.
Disengaging the PTO (refer to figures 3b and 3d):
1. Decrease the rpm to 1000 rpm.
2. Grasp the PTO handle and slowly disengage the PTO.
3. When the PTO is fully disengaged, the engine can be shut
down.
800-446-9823
41
SKB700