Network Setup - Wohler iAM-MIX Series User Manual

Network Setup

This is the place to make network IP Address changes to the local iAM-MIX unit.
Use DHCP? Check this box if your network has a DHCP server and you want to use
dynamic addressing. Otherwise, the static IP address entries below will be used.
IP Address: Enter the network address. Leading zeroes are not required.
IP Mask should usually be 255.255.255.0 unless your network can work across
multiple subnets.
Gateway Address should usually be the same domain and subnet address
numbers, with the last octet being .1.
DNS-nameserver: A default value is shown for reference only. DNS is not
normally required for basic static IP network configurations to work. Your IT
administrator will specify a value to work with mixed static/dynamic network
setups.
Save applies the changes internally before rebooting the unit.
Page
22