Table of Contents
Advertisement
9. Unplug the equipment during lightning storms or when unused for long periods
of time.
10. Refer all servicing to qualified service personnel. Servicing will be required
under all of the following conditions:
a. The equipment has been damaged in any way, such as when the power-
supply cord or plug is damaged.
b. Liquid had been spilled or objects have fallen onto the equipment.
c. The equipment has been exposed to rain or moisture.
d. The equipment does not operate normally.
e. The equipment has been dropped.
Safety Symbols
WARNING:
The symbol to the left warns of electric shock hazard inside the unit.
Disconnect the power cord before removing access panels when installing
upgrades. Only qualified service personnel are to operate the equipment
with covers removed, and are to exercise caution to avoid personal injury.
Mounting
The unit is designed for a standard 19" rack. Install it at ear/eye level for best high
frequency response and visual observation of the display screens. Please adhere to
the following clearances:
Clearance
Heat Dissipation
The ambient temperature inside the mounting enclosure should not exceed 40°
Celsius (104° Fahrenheit). Adjacent devices can be rack mounted (or stacked) in
proximity to the unit if this temperature is not exceeded. Otherwise, allow a 1RU
(1.75"/44.45mm) space above and below the unit for air circulation.
To reduce noise, the monitor does not have any fans. As a result, the heat
generated by the class D power amplifiers, power supplies, and other
components is vented by slots in the sides and back of the unit. Therefore,
as a safety precaution, you must allow proper ventilation on these surfaces.
24" Front
3" Rear
2" Sides
1.75" Top and Bottom (if either radiates heat)
0" Top and Bottom (if no heat)
Surface
Page 6
Advertisement
Table of Contents
