Introduction
This chapter describes how to download a software update file to your computer,
transfer it to a USB flash drive and install into an iAM-MIX.
Download the Software
The iAM-MIX software update can be found at http://www.wohler.com, under
Product Downloads on the Products > iAM-MIX page, in Support > Downloads, or
contact Wohler Customer Support for more information.
Unzip and copy the update file(s) from your computer to the root directory (not
inside a folder) of a USB flash drive. It must be FAT32 file type, and does not need
to be empty.
The Web GUI is required to perform the software upgrade procedure. Refer to
Chapter 4 First Time IP Assignments if not already set up for your network.
Installing the Software Locally
Insert USB drive with update files into iAM-MIX front panel jack.
Click on System Update in the web browser GUI.
If it is not green, click to check the box on the selected version and click Update
System.
APPENDIX A:
Software Upgrades
Page
25