Table of Contents
Advertisement
AES In: These four BNC jacks accept AES3id digital audio pairs at 48 kHz
sample rate. Channels are selected as AES 1-8.
SDI: The two cages provided accept SFP modules compatible with SDI coaxial or
optical signals. Single or dual transceiver arrangements are possible. A software
license must be installed for an SFP port to function.
Analog Inputs: This DB-25 female connectors accepts +10dBu broadcast level
balanced audio. Tascam pinout cables may be used, and can be purchased
Wohler Sales.
Analog Outputs: These male XLR connectors provide two balanced analog
outputs:
Left
monitored by the internal speakers.
Channel Displays
Display information for each channel strip is shown in Figure 2-3 below.
Active (Mixed Right)
Activity Meters: The activity bargraph meter's 10-segments provide a quick
indication of signal presence. A floating peak bar above an average level stacked bar
are shown. The meter left/right position(s) also indicates the Mix Assignments. Left
and right meters are displayed when a mono source channel is being sent to both sides
of the speakers, headphones and Line Outputs.
Mute: When a channel is muted, the entire display is inverted for reverse video, with
labels and icons becoming black.
Strip Labels: Two lines of text can be used to identify the audio source by name,
channel number, or other information.
Default labels are shown in the first example above; generic text in the second.
Five or six upper case letters or numbers will typically fit on each line. Since text
character widths vary, the exact number of characters displayed can vary. The right
edge may get cut off if very wide characters are entered.
Lower case text characters are shown as smaller capital letters (small caps) to allow
more characters to be displayed.
and
. The source of these signals is the mix of audio as
Right
Figure 2-3: Strip-Channel Display
Activity Meters & Mix Indicators
Muted (Mixed Left &Right)
Page
10
Advertisement
Table of Contents
